Meyer Sound MILO 600HP

Buy Meyer Sound MILO 600HP Amplified Complete Kit | musicconcertevent.com

If you want to buy a complete Meyer Sound MILO 600HP amplified kit ready to deploy at professional events, musicconcertevent.com has one full system available at €13,000. The package includes 6 MILO self-powered curvilinear array loudspeakers delivered on two trolleys of 3 units each, 6 protective covers for the electronics modules, 2 600HP self-powered high-power subwoofers, and 2 MILO bumpers for flying configurations. The system dates from 2013, has been revised and checked, and is in perfect condition.

Meyer Sound MILO has ample power reserves at 140 dB SPL peak output for high output level, longer throw applications in large venues, yet its weight and cabinet dimensions allow for its use in more compact spaces. Because MILO is fully self-powered, no external amplifier racks are required. Every cabinet carries its own amplification and processing internally, which means you arrive on site, hang the array, connect signal cables, and deploy. For rental companies and production companies that prioritize fast setup and compact touring footprint, the MILO system offers a commercially proven, widely recognized system at a fraction of its original cost.

---

Complete Kit Contents and Price

Year: 2013. Revised and checked. Condition: perfect.

---

What Is the Meyer Sound MILO?

Meyer Sound MILO is a self-powered, four-way loudspeaker designed for vertical curvilinear arraying. It delivers 140 dB SPL peak output for high output level, longer throw applications in large venues. Because the system is self-powered, each MILO cabinet integrates dedicated amplification and processing specifically tailored to its drivers, ensuring optimal performance and eliminating the guesswork associated with external amplifier matching.

Internally, the MILO features two 12-inch neodymium magnet cone drivers for the low and low-mid frequencies, a 4-inch diaphragm compression driver for the mid-high range, and three 2-inch diaphragm compression drivers for the very-high frequencies up to 18 kHz. The very-high frequency drivers are coupled with a patented Ribbon Emulation Manifold (REM) to minimize distortion and provide an even 90-degree horizontal coverage pattern.

The unit in this listing carries the driver complement described by the seller as 2×12″ + 1×1.5″ + 3×0.75″, which corresponds to the MILO four-way driver architecture confirmed in the technical documentation.

Meyer Sound MILO specs:

---

What Is the Meyer Sound 600HP?

The Meyer Sound 600HP is a self-powered, high-output subwoofer that can be used in both flown and ground-stacked configurations. It features two specially designed high-power 15-inch cone drivers with 4-inch voice coils, each rated to handle 1,200 watts. Total output power is 2,250 watts (4,500 watts peak), providing sufficient headroom for the most extreme sound reinforcement demands.

Operating frequency range is from 36 Hz to 150 Hz, with a peak SPL of 138 dB at one meter. Each cone driver runs on a channel of the integral two-channel class AB/H amplifier with complementary MOSFET output stages. TruPower limiting protects the drivers and holds long-term power compression to less than 1 dB.

Meyer Sound 600HP specs:

---

Meyer Sound MILO 600HP Kit Price: Estimated Retail Value and Resale Margin

Understanding the current secondary market helps you evaluate this listing accurately.

At €13,000 for the complete kit, this listing prices the 6 MILO units, 2 subwoofers, 2 bumpers, covers, and trolleys as a single deployable package. Buying individual components at market reference rates would cost considerably more. Furthermore, the 2013 vintage with full revision and check means the system functions correctly and carries no deferred maintenance costs.

---

Real Profit Examples

Example 1: Equipment Reseller Breaking the Kit Apart

• Purchase: complete kit at €13,000
• Resell 6 x MILO at €2,200 each = €13,200
• Resell 2 x 600HP at €1,800 each = €3,600
• Resell bumpers and accessories separately: €400 to €800
• Total resale: €17,200 to €17,600
• Gross profit before platform fees and freight: €4,200 to €4,600

Example 2: Rental Company Adding a Self-Contained Mid-Size System

• Purchase: complete kit at €13,000
• Day rate for a 6-unit MILO system with 2 x 600HP: €800 to €1,400 per event
• Breakeven point: approximately 10 to 17 event days

Example 3: Production Company Using MILO as Fills or Delays Within an Existing System

• Use case: 6 x MILO as front fill, sidefill, or delay for an existing LYON or LEO-M main system
• Cost: €13,000 for a complete deployable subsystem with subwoofers
• Value added per event: €300 to €600 per deployment
• Recovery timeline: approximately 22 to 44 events

---

What Is a PA System and Where Does the MILO 600HP Kit Fit?

A PA system is the combination of loudspeakers, amplification, signal processing, and cabling that delivers audio to a live audience. The MILO 600HP kit delivers the full-range loudspeaker layer and the low-frequency subwoofer layer of that system in a single purchase.

Because MILO is self-powered, the amplification layer comes built into each cabinet. As a result, you do not need a separate amplifier rack, power conditioning, or speaker cable bundles running from a rack to the hang position. Signal enters the MILO via a standard XLR connection, and the internal amplifier takes over from there. MILO systems can be deployed in either flown or ground-stacked configurations. Captive QuickFly rigging hardware uses rigid AlignaLinks for coupling the units and allows nine splay angles between 0° and 5°, making array adjustment easy and often eliminating the need for a pullback strap in flown configurations.

The 600HP subwoofers extend the system bandwidth from 60 Hz down to 36 Hz, adding the sub-low impact that standalone MILO arrays lack for music-heavy productions.

---

Meyer Sound Line Array: How MILO Compares to LYON and LEOPARD

The MILO system is discontinued from Meyer Sound’s active catalog. As a result, the secondary market is the only source for additional units. Furthermore, rental companies and production houses that already operate MILO inventory actively seek additional units to expand system scale, which keeps secondary market demand consistent.

For full system integration guidance, MAPP system design, and Galileo processor configuration for MILO deployments, the team at Sasphonik provides specialist Meyer Sound technical consultation.

---

600HP Meyer Sound Amplifier, Watts, and System Integration

The 600HP is self-powered, meaning it contains its own 2-channel class AB/H amplifier. Total output power is 2,250 watts in burst operation (4,500 watts peak), and TruPower limiting holds long-term power compression to less than 1 dB. No external amplifier is required. Furthermore, the 600HP is designed to work seamlessly with Meyer Sound MILO curvilinear array loudspeakers and can be used in medium to large theatres, clubs, houses of worship, and portable and installed AV systems.

For signal processing and system management, the MILO and 600HP system uses a Galileo 616 or Galileo GALAXY processor for array alignment, delay, equalization, and matrix routing. A Galileo 616 is available separately at musicconcertevent.com alongside this listing.

For additional equipment sourcing and professional AV technical references across brands, Stage Electronic and Boston Pro Sounds are relevant resources in the European and US professional audio markets.

---

What to Consider Before Starting a PA Event Company or Rental Business With MILO

If this kit forms the starting point of a new rental or event production business, address these points before your first booking:

1. Array processor: The MILO and 600HP are self-powered but still need a Galileo 616 or GALAXY processor for signal routing, alignment, delay, and equalization. Without a processor, you cannot properly align the array to the venue. A Galileo 616 is available separately at musicconcertevent.com.
2. System design: Use Meyer Sound’s MAPP system design tool before every deployment to model coverage patterns, SPL distribution, and array tilt angles for each specific venue.
3. Rigging for 6 units: A single flown array can include up to 24 MILO loudspeakers. Stacking no more than 6 cabinets is advised for ground-stacked configurations. This kit includes 6 MILO units, which gives you a left-right hang of 3 per side in a flown configuration, or a single 6-unit ground stack. The 2 bumpers included in this kit are required for any flown application.
4. Transport: Each MILO weighs 106.60 kg. Six units total 639.6 kg of speaker weight. Add 2 x 600HP at 82.55 kg each for 165.1 kg of subwoofer weight. A van or small truck handles this kit comfortably for local and regional deployments.
5. Power requirements: Each MILO and each 600HP draws its own mains AC power. Six MILO plus 2 x 600HP require 8 individual mains feeds at the venue. Confirm power circuit capacity with the venue electrician before every event.
6. Insurance: Professional AV equipment used at live events needs specialist event production insurance. Standard business policies across France and the EU do not cover live show liability.

---

Where to Sell Used Meyer Sound MILO and 600HP Equipment

If you buy this kit for resale, these platforms actively trade Meyer Sound M Series inventory across Europe and the USA:

• Reverb.com: Active US and European buyer base for Meyer Sound self-powered systems.
• GearSource: Industry-specific marketplace, active in MILO system listings.
• 10Kused.com: European-focused platform with active Meyer Sound inventory.
• Usedful.eu: UK and Europe-based platform, active in MILO and M Series listings.
• SoundBroker.com: Specialist professional audio classifieds with active Meyer Sound listings.
• eBay: Broad reach for well-known model identifiers with active search demand.
• Facebook Marketplace: Good for local sales within France and neighboring EU countries.

---

Why Our MILO 600HP Kit Is Different

Most used Meyer Sound MILO listings give buyers a unit count and a price. Whether the system has been serviced or revised is unstated. Whether bumpers, covers, and trolleys are included goes unspecified.

At musicconcertevent.com, we tell you the year of manufacture (2013), confirm the system has been revised and checked, specify every included accessory (covers, bumpers, and trolleys), and confirm the condition is perfect. That level of detail is standard across every listing we post.

---

Why Buy Meyer Sound MILO From musicconcertevent.com

musicconcertevent.com operates as a professional audio equipment seller based in France, serving buyers across Europe and internationally. We source and sell professional-grade PA equipment from brands including Meyer Sound, L-Acoustics, d&b audiotechnik, QSC, and Yamaha Pro Audio.

Our France-based location gives European buyers a direct logistics advantage. Intra-EU freight avoids post-Brexit customs complications. As a result, buyers in Germany, Belgium, the Netherlands, Spain, Italy, and other EU member states face no additional customs handling. For US and international buyers, we ship worldwide with full documentation and provide accurate freight quotes before any payment.

---

musicconcertevent.com vs 10Kused vs Usedful.eu

---

Shipping Policy

All orders ship via freight carrier from France. Within Europe, transit runs 3 to 7 business days. Intra-EU buyers face no customs processing.

For the USA and other international destinations, transit runs 7 to 21 business days from dispatch, subject to customs clearance. International buyers take full responsibility for all import duties, local taxes, and brokerage fees. musicconcertevent.com does not cover customs charges outside France.

Additional freight fees apply in these situations:

We do not ship to P.O. Boxes. Standard shipments: 3 to 5 business days. Freight shipments: 3 to 7 business days from our warehouse. International fees at checkout are estimates only. Final costs confirmed after the transaction completes.

No local pickup on standard orders. All sales process online and ship via freight carrier. Truckload purchases may qualify for local pickup by appointment at our France location only.

---

Returns Policy

Contact us within 3 to 4 business days of delivery if you identify any issue. Return items with all original packaging and included accessories. The buyer covers return shipping in all cases.

International returns are not accepted.

Where a defective unit qualifies within the 3 to 4 business day window and a replacement is in stock, we exchange it for the same model. If you keep a defective item and repair it yourself, a partial refund is available.

A 20% restocking fee applies to all accepted returns. Items sold as-is are final sale and not eligible for return.

---

FAQ

What is the Meyer Sound MILO 600HP amplified complete kit?

This kit contains 6x Meyer Sound MILO self-powered curvilinear array loudspeakers on 2 trolleys of 3, 6 protective electronics covers, 2x 600HP self-powered subwoofers, and 2x MILO bumpers. Year 2013, revised and checked, perfect condition. Total price: €13,000.

What is the 600HP Meyer Sound amplified complete kit price?

At musicconcertevent.com, the complete MILO + 600HP kit is €13,000. Individual MILO units on the secondary market reference approximately €2,400 per unit with covers and dolly on comparable listings.

What are the 600HP Meyer Sound specs?

The 600HP uses two 15-inch high-power cone drivers with 4-inch voice coils, operates from 36 Hz to 150 Hz, delivers 138 dB peak SPL at one meter, and produces 2,250 watts burst output (4,500 watts peak) via a 2-channel class AB/H amplifier with TruPower limiting.

How many watts is the Meyer Sound 600HP?

Total output power of the 600HP is 2,250 watts burst (4,500 watts peak), providing sufficient headroom for the most extreme sound reinforcement demands. Each of the two 15-inch drivers handles 1,200 watts AES individually.

What is the Meyer Sound 600HP for sale price?

At musicconcertevent.com, 2 x 600HP units are included in the complete MILO kit at €13,000. Individual 600HP units are not available separately in this listing. Contact us if you want to discuss purchasing components individually.

What is the difference between the Meyer Sound 600HP and the 700HP?

The 600HP uses two 15-inch drivers and operates from 36 Hz to 150 Hz at 138 dB peak SPL. The 700HP uses two 18-inch drivers for deeper low-frequency extension and higher output. The 600HP matches dimensionally with MICA curvilinear arrays and MILO systems for mixed deployments. This listing contains 600HP units, not 700HP.

What processor does the Meyer Sound MILO system need?

The MILO and 600HP are self-powered but require a Meyer Sound Galileo 616 or Galileo GALAXY processor for system alignment, matrix routing, delay, and equalization. A Galileo 616 is available separately at musicconcertevent.com.

Where can I buy a used Meyer Sound MILO 600HP system in Europe?

musicconcertevent.com has a complete 6-unit MILO + 2 x 600HP kit at €13,000, shipping from France. Additionally, GearSource, 10Kused, Usedful.eu, and SoundBroker list MILO inventory in varying quantities, though condition, inclusions, and pricing vary by listing.

Can the MILO be used as front fill or sidefill alongside a larger system?

Yes. MILO was designed to easily integrate with other Meyer Sound loudspeakers, particularly the M3D line array, M3D-Sub directional subwoofer, M2D compact curvilinear array, and the CQ-2 full-range narrow coverage loudspeaker. It also integrates with current LYON and LEO-M systems via the Galileo GALAXY delay integration workflow.

Do you accept local pickup?

Local pickup applies to truckload sales only, by appointment at our France location. All standard orders ship via freight carrier.

---

Disclaimer: Resale margin estimates draw from publicly available used market data at the time of writing and do not represent guaranteed returns. Market conditions vary by timing, platform, condition, and buyer demand. musicconcertevent.com makes no guarantee of resale value. All as-is sales are final.