Meyer Sound MSL-4 Self-Powered Loudspeakers

H1: Buy Meyer Sound MSL-4 Self-Powered Loudspeakers at musicconcertevent.com

If you are searching for Meyer Sound MSL-4 self-powered loudspeakers at a direct price, musicconcertevent.com has 6 units available at €1,500 per pair. That is 3 pairs total, each pair priced at €1,500, giving you a complete acquisition cost of €4,500 for the full lot. No external amplifiers required. No additional processing investment needed to deploy. The MSL-4 carries its own amplification and processing internally, which is the defining characteristic that separates Meyer Sound’s self-powered platform from passive cabinet systems.

The Meyer Sound MSL-4 has been used on major touring productions, outdoor festivals, theater installs, and permanent venue systems across the USA and Europe for decades. It is not a budget loudspeaker. It is a professional touring cabinet that still commands real resale value on the used market. If you are a sound rental company, production house, venue operator, or audio reseller looking for a verified Meyer Sound unit at a price well below current market rates, this listing is worth acting on now.

---

What Is the Meyer Sound MSL-4?

The Meyer Sound MSL-4 is a self-powered, high-output touring loudspeaker from Meyer Sound’s MSL series. Self-powered means the amplifier and DSP processing are built into the cabinet itself. You connect signal and power, and the cabinet handles the rest. There is no separate amplifier rack, no external crossover, and no additional system processing required for basic operation.

The MSL-4 uses a 4×4″ compression driver array combined with a 12″ woofer in a format designed for medium to large-scale touring applications. It delivers pattern-controlled high SPL output across a wide frequency range and was designed for use as a main PA cabinet, side hang, or delay speaker depending on system configuration.

Meyer Sound’s self-powered technology, developed and refined over decades, integrates the amplifier specifically to the transducers in each cabinet. This means the amplifier is matched to the driver characteristics rather than being a generic power source. The result is tighter transient response, integrated protection, and consistent performance across units.

The MSL-4 has a known touring history. Units have logged real hours on professional productions. Buyers should request condition reports and have units tested before committing to deployment on a professional show without prior verification.

---

System Manifest

Note: Units are sold in pairs at €1,500 per pair. Three pairs are available. Contact musicconcertevent.com for full lot pricing or individual pair availability.

---

Estimated Retail Value and Resale Margin

• Typical used market price for a Meyer Sound MSL-4 in working condition: $2,500 to $4,500 USD per unit
• Current asking price: €1,500 per pair (approx. $820 USD per unit at current exchange)
• Estimated resale margin per unit: 200% to 450% depending on condition verification and regional market
• Full lot of 6 units at asking price: €4,500 (approx. $4,900 USD)
• Estimated retail value of 6 units at current used market rates: $15,000 to $27,000 USD

Real profit example: A rental company purchases all 6 units at €4,500 total (approx. $4,900 USD). They deploy them as a 6-cabinet main hang and charge $2,500 per event for the system as part of a broader PA package. The full investment is recovered in two rental events. Each subsequent rental is near-pure margin on the cabinet cost. Selling 2 units after one year of use at $2,800 each returns $5,600 USD against a total purchase cost of $4,900 for all 6, meaning the 2 sold units alone cover the entire acquisition.

---

What Is a Self-Powered Loudspeaker and Why It Matters

A self-powered loudspeaker combines the speaker cabinet, amplifier, and signal processing into one unit. In a traditional passive PA system, you need a separate amplifier for every cabinet or pair of cabinets, plus a system processor to handle crossover, EQ, and protection. In a self-powered system like the MSL-4, all of that is inside the box.

For touring companies and rental houses, self-powered systems reduce rack weight, simplify system deployment, and eliminate amplifier matching decisions. For a venue installation, self-powered cabinets reduce infrastructure cost and wiring complexity. The tradeoff is that if the internal amplifier fails, the entire cabinet goes offline until repaired. That is the key risk factor buyers should assess on used self-powered units before deploying them on professional productions.

---

Meyer Sound MSL-4 vs MSL-3 and MSL-6

Buyers searching for meyer msl-3 specs and meyer sound msl-6 are often comparing within the MSL family before committing to a purchase. Here is how the three models relate:

• Meyer Sound MSL-3: a smaller format self-powered loudspeaker in the MSL series, designed for applications requiring less output and a more compact form factor than the MSL-4. The MSL-3 is suited for smaller venues, delays, and fill applications where the MSL-4 would be oversized.
• Meyer Sound MSL-4: the mid-to-large touring cabinet in the series. Higher output, larger format, designed for main hang and medium to large venue applications. This is the unit available in this listing.
• Meyer Sound MSL-6: a larger, higher-output loudspeaker in the MSL series, designed for large-scale touring and stadium-class applications where the MSL-4’s output ceiling is not sufficient.

The MSL-4 sits at the most versatile point in the range. It is large enough for professional main PA use on tours and festivals and compact enough to be practical for mid-size venue installs and rental company inventory.

---

Best PA Systems to Use with Meyer Sound Loudspeakers

Meyer Sound cabinets are designed to work within an all-Meyer ecosystem where possible. For buyers integrating MSL-4 units into a broader system:

• Subwoofer pairing: Meyer Sound 650-P, 700-HP, or 600-HP self-powered subwoofers are natural companions for the MSL-4
• Signal processing: Meyer Sound Galileo or SIM system processing integrates natively with Meyer cabinets; third-party options like Lake and XTA are also used in mixed systems
• Console compatibility: the MSL-4 accepts standard balanced line-level signal from any professional mixing console including Avid, Yamaha, DiGiCo, Allen and Heath, and SSL Live

If you are building a system from scratch around these MSL-4 units, factor in subwoofer pairing and signal processing as part of your total budget.

---

Best Amplifiers for New PA Companies

Because the MSL-4 is self-powered, no external amplification is needed for these cabinets specifically. However, if you are building out a broader PA inventory alongside this purchase:

• Crown DCi series: reliable touring amplifier for passive cabinets, with onboard DSP and contractor-grade build quality
• Lab.gruppen FP series: high output density per rack unit, widely used for touring monitor and front-fill applications
• QSC PL and GX series: strong output-to-cost ratio for rental companies building initial amplifier inventory
• Powersoft K series: efficient Class D touring amplifiers with integrated DSP, well suited for companies building mixed self-powered and passive systems

Verified compatible amplifier inventory is available through partners including sasphonik.com and bostonprosounds.com.

---

What to Consider Before Starting a PA Event Company

If this MSL-4 purchase is part of a new business entry into live sound production or PA rental, these are the factors that determine whether the investment performs:

• Coverage assessment: 6 MSL-4 cabinets in a standard 3-per-side hang can cover audiences of 1,500 to 3,000 in an outdoor configuration depending on throw distance and hang height
• Power infrastructure: each MSL-4 requires a dedicated power circuit; confirm venue power availability before committing to an event
• Subwoofer investment: the MSL-4 covers mid-high frequencies; a full-range system requires companion subwoofers
• Service access: Meyer Sound self-powered units require factory-trained technicians for internal amplifier repair; factor service cost and turnaround time into your risk model
• Insurance: six units at current market value represent $15,000 to $27,000 USD in equipment; dedicated instrument and equipment insurance is not optional at this level
• Crew: self-powered systems still require trained riggers and audio engineers for safe, professional deployment

---

Why Buy from musicconcertevent.com?

musicconcertevent.com operates in the professional audio resale market with a direct focus on verified inventory and complete manifests. We do not list equipment without accounting for it. Every listing includes model, quantity, condition status, and pricing before any buyer commitment is required.

This MSL-4 listing is priced significantly below current used market rates. That gap exists because we source directly and pass the margin to the buyer rather than holding out for retail-adjacent pricing. Our approach is straightforward: accurate listings, clear pricing, and complete information so buyers can make informed decisions without back-and-forth.

We operate with the same commitment to product accuracy and transparency that professional audio resale specialists maintain in this market.

---

Why This Listing Is Different

Most used Meyer Sound listings online are single-unit sales with minimal condition data, no pairing information, and no clarity on whether internal amplifiers have been serviced. This listing specifies the model, unit count, pairing structure, and price per pair. If you need all 6 units, the full lot price is clear. If you need one pair to complement an existing rig, that option is also available. That level of clarity is not standard in the used professional audio market.

---

Shipping Information

We ship to the USA and across Europe. Domestic USA freight on self-powered loudspeakers of this size typically takes 5 to 10 business days. International freight to Europe typically takes 10 to 21 business days depending on destination country and customs clearance timeline. All shipments are insured for declared value. Freight quotes are issued at the point of purchase inquiry based on destination and quantity ordered.

We do not offer local pickup for individual or lot purchases. Local pickup is available only for truckload volume sales. All other transactions are completed online with freight delivery to the buyer’s specified address.

---

Where to Sell Meyer Sound Equipment

If you are purchasing these units as a reseller, the active markets for professional Meyer Sound equipment include:

• GearSource: the primary B2B professional audio marketplace in the USA and Europe, with strong demand for Meyer Sound inventory specifically
• Reverb: active buyer base for touring and professional loudspeaker equipment
• eBay: high volume and global reach; Meyer Sound units move reliably on eBay when listed with accurate condition descriptions
• Facebook Marketplace: effective for regional sales to local production companies, venues, and touring acts
• Direct outreach to touring production companies, permanent install integrators, and university or corporate AV departments

Meyer Sound equipment retains resale value better than most brands in the professional audio segment. Buyers actively search for it by brand name, which shortens time-to-sale compared to generic or lesser-known manufacturers.

---

Comparison: Meyer Sound MSL-4 vs Generic $1,500 Used Loudspeaker

---

FAQ

H3: What is the meyer sound msl-4 price on the used market?

The Meyer Sound MSL-4 typically sells for $2,500 to $4,500 USD per unit on the used market depending on condition, service history, and whether internal amplifiers have been recapped or serviced. The units listed at musicconcertevent.com are priced at €1,500 per pair, which works out to approximately $820 USD per unit at current exchange rates, well below standard used market pricing.

H3: Where can I find meyer msl-4 for sale?

musicconcertevent.com has 6 Meyer Sound MSL-4 units available at €1,500 per pair. Additional listings appear on GearSource, Reverb, and eBay periodically, though paired lots at this price point are uncommon. Availability on those platforms for matched pairs is inconsistent.

H3: What are the meyer msl-4 specs?

The Meyer Sound MSL-4 is a self-powered loudspeaker using a 4×4″ compression driver array and 12″ woofer with integrated amplification and DSP. Full technical specifications including frequency response, maximum SPL, power consumption, and connector pinout are available in the official Meyer Sound MSL-4 documentation. Seller-confirmed spec details for this specific inventory are not provided by the seller; contact musicconcertevent.com for condition and technical data on these units.

H3: What is the meyer msl-4 weight?

The Meyer Sound MSL-4 is a substantial touring cabinet. Exact weight for this specific inventory is not confirmed by the seller. The official Meyer Sound MSL-4 specifications list the cabinet weight; buyers should consult the Meyer Sound MSL-4 manual or official product documentation for confirmed weight data before planning rigging or transport.

H3: Where can I find the meyer msl 4 manual?

Meyer Sound publishes product documentation through their official support portal at meyersound.com. The MSL-4 manual covers installation, wiring, power requirements, rigging, and technical specifications. It is available for download directly from Meyer Sound’s documentation library.

H3: What are the meyer msl-3 specs and how does it differ from the MSL-4?

The Meyer Sound MSL-3 is a smaller self-powered loudspeaker in the MSL series, designed for applications requiring less output and a more compact footprint than the MSL-4. The MSL-3 is suited for smaller venues, delay speaker applications, and fill coverage where the MSL-4 would be oversized. Full MSL-3 specifications are available through Meyer Sound’s official documentation. The current listing at musicconcertevent.com covers the MSL-4, not the MSL-3.

H3: What is the meyer sound msl-3 and is it available?

The meyer sound msl-3 is the compact variant in Meyer Sound’s MSL self-powered loudspeaker series. It is not part of the current listing at musicconcertevent.com. Contact us directly if you are sourcing MSL-3 units and we can advise on availability.

H3: What is the meyer sound msl-6?

The Meyer Sound MSL-6 is the large-format, high-output loudspeaker in the MSL series, designed for stadium-scale and large touring applications where MSL-4 output is insufficient. It is not part of this listing. The current inventory at musicconcertevent.com covers the MSL-4 specifically.

H3: Do you offer local pickup for Meyer Sound equipment?

Local pickup is not available for individual or lot purchases. We sell online only with freight delivery. Local pickup applies exclusively to truckload volume transactions. All other purchases ship directly to the buyer’s address with full insurance coverage.

H3: Do you ship Meyer Sound MSL-4 units to the USA and Europe?

Yes. We ship to both the USA and Europe. USA freight typically takes 5 to 10 business days. European international freight takes 10 to 21 business days including customs. All shipments are insured for declared value. Freight quotes are issued at inquiry based on destination and quantity.

H3: Where can I buy professional PA audio equipment online?

musicconcertevent.com, GearSource, Reverb, and eBay are the primary channels for professional PA audio equipment in the USA and Europe. musicconcertevent.com provides verified inventory with complete manifests, clear pricing, and direct access to lot purchases that are rarely available on general marketplaces.

---

Purchase This Inventory

Meyer Sound MSL-4 self-powered loudspeakers. 6 units available. €1,500 per pair. 3 pairs total. €4,500 for the full lot. Ships to USA and Europe. Online purchase only. No local pickup on individual or lot sales.

Visit musicconcertevent.com to inquire or purchase.